tire type VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual

Page 12 of 369

Downloaded from www.Manualslib.com manuals search engine 00-6
Wheels, tires Engine output (kW)
Model
Tire size 1)

Wheel
Offset
Hole pattern
55 gas
55, 66 - Diesel Sedan/Wagon 185/65 R 14 86 S
195/60 R 14 86 S
205/50 R 15 86 S
185/65 R 14 85 Q (M+S)
195/60 R 14 85 Q (M+S)
205/50 R 15 85 Q (M+S) 6 J x 14
6 J x 14
6 J x 15
6 J x 14
6 J x 14
6 J x 15 38
38
38
38
38
38 4-hole
55 Sedan/Wagon T 125/70 R 15 95 M
(Temp. spare) 3 1
/
2 J x 15
40 1)
Tire pressures Sticker on vehicle Page 6 of 8Suspension, Wheels, Brakes, Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.00.1

Page 13 of 369

Downloaded from www.Manualslib.com manuals search engine 00-7
Engine output (kW)
Model
Tire size 1)

Wheel
Offset
Hole pattern
85 kW Sedan/Wagon 185/65 R 14 86 H
195/60 R 14 86 H
205/50 R 15 86 H
185/65 R 14 85 Q (M+S)
195/60 R 14 85 Q (M+S)
205/50 R 15 85 Q (M+S) 6 J x 14
6 J x 14
6 J x 15
6 J x 14
6 J x 14
6 J x 15 38
38
35
38
38
35 4-hole
85 kW Sedan/Wagon T 125/70 R 15 95 M
(Temp. spare) 3 1
/
2 J x 15
40
128 kW Sedan/Wagon 205/50 ZR 15 86 W
195/55 R 15 85 T (M+S)
195/55 R 15 85 T (M+S)
205/50 R 15 85 T (M+S) 6 J x 15
6 J x 15
6 1
/
2 J x 15
6 J x 15 35
35
33
35
128 kW Sedan/Wagon T 125/70 R 16 95 M
(Temp. spare) 3 1
/
2 J x 16
38 1)
Tire pressures Sticker on vehicle Page 7 of 8Suspension, Wheels, Brakes, Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.00.1

Page 14 of 369

Downloaded from www.Manualslib.com manuals search engine 00-8
Engine output
(kW) Model
Tire size 1)

Wheel
Offset
Hole
pattern
85 kW Sedan/Wagon
syncro 185/65 R 14 86 H
195/60 R 14 86 H
205/50 R 15 86 H
185/65 R 14 86 Q
(M+S)
195/60 R 14 86 Q
(M+S)
205/50 R 15 86 Q
(M+S) 6 J x 14
6 J x 14
6 J x 15
6 J x 14
6 J x 14
6 J x 15 38
38
35
38
38
35 4-hole
85 kW Sedan/Wagon
syncro T 125/80 R 15 95 M
(Temp. spare) 3 1
/
2 J x
15 40
128 kW Sedan/Wagon
syncro 205/50 ZR 15 86 W
205/50 R 15 86
(M+S) 6 J x 15
6 J x 15 35
35 5-hole
128 kW Sedan/Wagon
syncro T 125/70 R 16 95 M
(Temp. spare) 3 1
/
2 J x
16 38 1)
Tire pressures Sticker on vehicle Page 8 of 8Suspension, Wheels, Brakes, Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.00.1

Page 78 of 369

Downloaded from www.Manualslib.com manuals search engine 40-64
- Swivel in ball hub, whereby the hub must be
swivelled out of the cage (arrows) far enough to
allow the balls to fit into the ball tracks. Checking operation of constant velocity joint:
The constant velocity joint is correctly assembled
when the ball hub can be moved by hand backward
and forward over its entire axial movement range. - Swivel in the hub with balls by applying firm
pressure on the cage (arrow). Page 64 of 82Front Wheel Suspension, Shafts and Axle12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.40.1

Page 152 of 369

Downloaded from www.Manualslib.com manuals search engine 42-56
The spring plate must be installed so that the holes
"a" align with the bushing -2- in the shock absorber
eye. Otherwise, in extreme driving situations spring
plate -1- could contact the tire. Fig. 1 Lower spring plate, installation position 1 - Lower spring plate 2 - Shock absorber eye bushing Fig. 2 Spring seat, installation position Page 4 of 6Suspension strut, disassembling and assembling (four wheel drive vehicles)12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.42.5

Page 163 of 369

Downloaded from www.Manualslib.com manuals search engine 44-1


Vehicle alignment

Test requirements:
Measuring equipment correctly calibrated
Vehicle unladen1)

Tires inflated to correct pressure
Vehicle accurately aligned, suspension
bounced and rocked several times
Suspension, steering and steering linkage
checked for excessive play and damage.

Note:
Vehicle alignment should not be checked
before the vehicle has completed 1000 to 2000
km (600 to 1200 miles) as then the coil springs
have had time to settle.
The cause of vehicle imbalance may also be,
excessive residual imbalance and/or vertical
wheel runout.
1)
Unladened means: the weight of the vehicle
ready for the road (fuel tank completely filled,
spare wheel, vehicle tools and vehicle jack). Page 1 of 7Vehicle alignment12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.44.1

Page 309 of 369

Downloaded from www.Manualslib.com manuals search engine 48-39
Parts, cleaning and checking - Install tool VW 771 in the puller - Pull out sealing ring - Before assembly, the housing must be checked for contamination (paint residue, chips, dirt) and
thoroughly cleaned with compressed air and
alcohol
- Clean adhesive surface for adhesive tape in area
of the slot with solvent (e.g. L160 or alcohol)
- Check cylinder race for scoring or other damage. If scoring can be felt, replace entire steering gear
- Clean toothed rod (remove old grease in the tooth
pockets) Page 39 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1